nextec Microsoft Xbox 360 Disc Drive Replacement/Xbox 360 DVD Drive Phillips Liteon (DG-16D2S: A0A1/A0A2) with Laser (HOP-141X) T10 Screwdriver

I had the Xbox 360 drawback the place you set a sport in nevertheless it simply says "Open Tray" as an alternative of letting you play the sport. I might do the tapping factor and it sorta labored more often than not however did not appear to be a good suggestion to maintain banging on the Xbox.

So I ordered this half. I hadn’t learn the instructions about swapping out the board and soldering nevertheless it was fairly simple. Be sure to watch the Nextec instruction video from their web site. Like one other evaluate mentioned, you possibly can observe soldering with the outdated drive and the brand new board since you will not want these anymore.

Instantly after putting in the brand new drive with the outdated board I am again in enterprise and video games work flawlessly. Thanks Nextec!

I ordered the drive to exchange manufacturing facility Xbox 360 disk drive. Delivered to me quick however once I put in it, the drive wouldn’t open. After inspecting drive was used and was stuffed with mud. Contacted Amazon about sending a alternative. Substitute confirmed up and this one would open however wouldn’t learn Xbox 360 video games or play them. Irritating.

My Xbox 360 would not learn discs any longer and the disc tray would not open correctly. So, like a whole lot of different individuals, I ordered a alternative drive.

**IMPORTANT** In case your disc is studying error, you could not should swap your PCB board! For my drive, it would not learn discs as a result of the bearing in my disc motor was shot and all the disc would vibrate. When this occurred, the laser could not learn something due to the shaking. Test to see if yours does the identical factor by taking a look at it when it is spinning. Lookup the movies for a way to do that correctly so you do not harm something or injure your self. You too can wiggle the motor forwards and backwards and if there may be some play in it, then the bearing is shot. If that’s the case, then it is a fast repair. This motor within the drive has simply 3 screws and a ribbon cable holding it in. Simply swap your outdated one out with the brand new one from the brand new drive and that ought to clear up all issues.

I wished to go additional although, and have my disc tray work correctly. So, I proceeded to do the complete PCB swap.

I initially swapped my outdated PCB board to the brand new drive, as instructed, however the brand new laser would by no means proceed studying any discs. It could gentle up, do its common motion when a disc is loaded in, however then it might cease and would not proceed to try to learn. I even tried adjusting the laser resistance on the left POT inside the acceptable parameters, nevertheless it nonetheless refused to learn. I suspected that the laser module might not have wished to obtain full directions from my outdated PCB board, so I ended up simply placing my outdated laser and body into the brand new drive as properly. The gadgets from the brand new drive that have been stored have been the disc tray and mechanism(which my outdated one was defective), and the brand new disc motor(which my outdated one had a nasty bearing which precipitated all of my authentic disc errors).

I reassembled all the pieces and now my Xbox 360 reads my discs completely. This may occasionally have simply been a uncommon case for this to occur with my PCB board, however I am glad I used to be in a position to make use of the opposite parts to repair the unique points. I like to recommend this product to repair any of the problems you might have together with your DG-16D2S DVD drive on your Xbox 360. It’s possible you’ll discover that the PCB swap works completely for yours, or you could contemplate swapping out solely sure parts.

I didn’t know I used to be going to should disassemble some elements and solder issues or I wouldn’t have bought this. By the point I spotted, the return window was closed

This was good for my Xbox 360. Works like a champ! Would give it 5 stars however it’s a little loud however nothing too obtuse. I did should unsolder the the outdated PCB board and put it on the brand new drive so it might acknowledge the video games. Been utilizing it for a few weeks and I’m completely satisfied.

Xbox let me down with the restricted variety of backwards appropriate video games. So I keep a 360. to my dismay, I making an attempt to get in a fast match or two with a buddy and was stricken by the dreaded non-read error. Swapped the drive and now I’m again.

The belt was arduous and drive wouldn’t eject. Case had rust on it. Fortunately I used to be capable of take the laser out of it and restore my outdated drive. I attempted to contact the corporate however the web site is not lively. Don’t purchase!!

The dreaded “Open Tray” error was protecting me from jamming with Rocksmith 2014. This drive was fairly priced – a little bit greater than another sellers, however with significantly better critiques – and received my XBox360 Elite again up and working. Word the packaging insert directs you to Nextec’s web site for directions… there they inform you there are two strategies, because the PCB within the DVD drive has “keys” in firmware that should match the keys on the motherboard. The 2 strategies are swapping PCBs, or flashing the brand new drive. Effectively, the textual content for flashing is not even a hyperlink, so I clicked on PCB swap….it principally mentioned it ought to be performed by somebody with numerous expertise, a static mat, and anti-ESD wrist strap…and nothing else. Seems that is a great factor… after watching a YouTube video on easy methods to do the PCB swap, a second video got here up, whereby a man recommended simply swapping the laser mechanism… this includes two screws to maneuver the PCB out of the way in which, 4 screws to take away the laser mechanism, and detaching 3 ribbon cables… whereas the PCB swap includes the two PCB screws, 3 ribbon cables, plus de-soldering and re-soldering 6 small wires. Made much more sense to me to simply swap over the laser mechanism. My outdated one lit up, slid forwards and backwards, spun, and so on., however would not learn discs, even after adjusting the one pot down from ~6.49 to 4.6, then 3.46 kOhms… unsure what the problem was, however the brand new drive received me again up and working. By the way, if you have not taken your 360 aside to attempt cleansing the laser, adjusting the pots, and so on., or when you did however put it again collectively and it nonetheless did not work, and also you did not be aware of which make/mannequin DVD drive you could have, there are additionally movies on YouTube that inform you easy methods to establish what sort of drive you could have by eradicating solely the entrance cowl, which pops off fairly simply from the underside.